Biphasic Defibrillator-manufacture,factory,supplier from China

Characteristics of Emergency Transport Ventilator      Many people believe that emergency transport ventilators are equivalent to simple ventilators, because compared to professional ICU therapeutic ventilators, emergency transport ventilators do not have as many ventilation modes and parameter monitoring in terms of mode function. However, in fact, professional emergency transport ventilators should have the following major characteristics (which cannot be achieved by large ICU ventilators):       Portability:1. Small in size and light in weight.

The Lowest Priced Simple Anesthesia Machine     More and more hospitals are now able to perform general anesthesia surgery, and the essential equipment for general anesthesia surgery is anesthesia machines. For grassroots medical units, they will not carry out difficult surgeries. At present, small surgeries with lower difficulty are mainly used, and the anesthesia time is relatively short with low risks. So these hospitals will not choose high priced multifunctional anesthesia machines or anesthesia workstations.

HUIFA has attended Medical West Africa 2023, details as following:Fair Name: Medica West Africa 2023Time: 26-28 Sep., 2023Place: Landmark centre, Lagos, NigeriaBooth no.: 3D.31Welcome to be our honored partners.HUIFA

MODEL30 Anesthesia MachineAnaesthesia main unit:High resolution 5.5" LCD screenClose, semi-close, semi-open systemApplication: Adult, PediatricLow gas alarming: Low O2 gas pressure, it will gives alarming more than 7 seconds.High pressure Limitation: Whenever airway pressure exceed the pre-set High pressure,ventilator offers protection automatically, to assure airway pressure can not increase anymore which supplies safety to patient.Low pressure protection: Once O2 pressure less than 0.1MPa, N2O qas supply was stopped automatically.Power failure alarming.

Argon Plasma ESUTechnical Parameters:a) Ambient temp.range: 50℃ - 40℃;b) Relative Humidity Range: ≤80c)Atmospheric Pressure Range: 86.0-106.0kpad) Power:220V±22V,50Hz±1 or110V±11V,60Hz±1;e)Operating Freg.:416kHz；f)Rated Power:≤1100VA(Cut function 350W)g) Type: CF,Non-AP、Non-APG typeWoking modes comply with Argon Plasma function:a) Pure Cut:1W-300W(Load 500Ω) b)Blend 1:1W-200W(Load 500Ω)c)Blend 2:1W-150W(Load 500Ω)d) ENDO Cut:99%(Load 500Ω)e)Spray Coag.:1W-80W (Load 500Ω)f)Desicate Coag.:1W-120W (Load 500Ω)g) BI-Coag:1W-70W (Load 100Ω) (optional)h)Argon: Dual Argon airflow adjustment,

Argon Plasma ESU Surgery     In foreign countries, argon plasam esu is mainly used for endovascular intervention treatment of digestive endoscopy. With the emergence of this technical advantage, its use in endovascular intervention treatment of bronchoscopy has increased year by year and has become the mainstream technology in Germany.

Argon Plasam ESU are also be Used in Respiratory DepartmentThe department with the most widespread application of Argon Plasam ESU is the digestive department, and it is also the department with the most purchases of Argon Plasam ESU. In fact, Argon Plasam ESU can be applied in many departments, such as open surgery, minimally invasive gastrointestinal endoscopy surgery, respiratory surgery, and proctology surgery.There are two ways to treat with Argon Plasam ESU.

Is the Argon Plasma effective in Treating Polyps？      For patients with gastrointestinal polyps, surgery is often given for treatment in clinical practice. In the past, conventional open surgery was commonly used in clinical practice for treatment, which had good therapeutic effects.

Argon Plasma ESU Clinical Application(1) SurgeryA. Application of General Surgery and Hepatobiliary Surgery: The argon plasam is particularly suitable for surgeries involving substantial organs and large areas of bleeding. The argon ion beam scans back and forth on the wound, and the argon airflow can blow away blood, making the surgical field of view clearer. Thus achieving a hemostatic effect.B.

The Difference between ESU and Ultrasonic Surgery SystemThe principle of electrosurgical unit cutting is to generate voltage and current at the tip of the electric knife, and generate high temperature when in contact with the skin to cut tissue.The application principle of ultrasonic knife is to convert electrical energy into mechanical energy through a special conversion device, and the mechanical energy transmitted in the form of sine waves acts on the metal knife head at the front end, causing the knife head to produce 50-100 μ.The mechanical oscillation of m amplitude generates frictional