Electrical Surgical Unit

Product description

Applicable for general surgery, thoracic surgery, orthopedics, obstetrics and gynecology, urologic surgery, cerebral surgery,microsurgery, ENT surgery and etc

CUT MODE

Pure Cut: High-frequency alternating current produces smooth, fast cuts that induce little-understood hemostasis Mix 1: Preset Mix Cut Modes provide surgeons with varying degrees of hemostasis in cut mode. Mix 2: This mode is used for vaporization of prostate tissue or any fatty tissue. Higher output wattage gives rapid tissue cutting effect. BLEND 3: used for large coagulation in major surgery, with certain cutting function

ENDO CUT

This mode is used to automatically control the cutting system and reduces the complication rate of endoscopic sphincterotomy (EST) and the incidence of serum hyperamylaseemia after EST compared with the traditional hybrid cutting mode.

COAG MODE

SPRAY:

Spray output is made for direct coagulation at the tissue with spark. above spark does not give any cutting effect as its CREST FACTOR is high.

FORCCE:

This mode has a greater degree of steady state and covers all requirements of standard solidification. This produces finely tuned waveforms that create surface drag in the tissue, resulting in superior coagulation effects where the tissue is destroyed by excessive evaporation. This enables surgeons to remove surface structures without damaging deeper or peripheral tissue and to quickly cauterize large surface areas if needed.

DESICATE:

Coagulation in which the active electrode is in direct contact with the tissue is refered to as desiccation and is the type of coaqulationused in most surgeries it ensures pinpoint desiccation with less destruction of peripheral tissue

BIPOLAR & SEAL

BI-COAG: for high-precision control of the coagulation process and elimination of carbonization

BI-CUT: This bipolar cutting technology virtually eliminates excess current even when precision cutting tiny tissue structures Automatic: Starts coagulation by pressing the foot switch and automatically stops output and audio signals when tissue coagulates Sealing Mode : Provides a unique combination of pressure and energy to create vessel fusion without leaving any foreign matter behind.

Technical Parameters

a)Ambient temperature range: 5℃～40℃

b) Relative humidity range: ≤80;

cAtmospheric pressure range: 86.0~106.0kpa;

d) Power supply: 220V+22V, 50Hz+1 or 110V+11V, 60Hz+1;

e) Working frequency: 416kHz

f) Rated power: ≤1100VA (cut-off function 350W)n

g) Type: CF, NonAP, Non-APG type

Output mode:

a) Pure cutting: 1W-350W (maximum 400W, load 500Ω)

b) Mixed 1:1W-250W (load 500Ω)

c) Hybrid 2: 1W-200W (load 500Ω)

d) Hybrid 3: 1W-150W (load 500Ω)

e) ENDO cutting: 99% (load 500Ω)

f) Spray solidification: 1W-80W (load 500Ω)

g) Strong solidification..1W-120W (load 500Ω)

h) Drying electrocoagulation: 1W-120W (load 500Ω)

i) BI-Coag.:1W-70W (load 100Ω)

j) Automatic solidification: 1W-70W (load 100Ω)

k) BL-Cut: 1W-120W (load 100Ω)

l) Sealing: 1W-120W (load 100Ω)

Transportation and Storage:

Size: 490mm (L)x 400mm (W) x 155mm (H)

Weight: N.W.10 KG,G.W.12 KG

Packing size: 51*46*32 cm

Optional TrolleyTrolley Size:600*450*880mm

Weight: N.W.: 12KGSGW.: 15KGS

Package size: 62*63*95 cm

FAQ

Q1. What is the advantage about your company?

A1.The company has been engaged in export business for more than 15 years, with a professional team and professional production line.

Q2. What about quality assurance?

A2.We provide two-year warranty for medical equipment from the date of delivery.

Q3.The logo and the color can be customized?

A3.Yes, we welcome you to sample custom.

Q4. What about the delivery time?

A4.We have some material in stock, which can make sure to delivery the goods out quickly for small quantity orders. For customized orders, the delivery time is usually within 15 working days after receiving the payment.

Q5.What is payment terms?

A5.T/T, Credit Card, L/C, PayPal.

Q6: Can you sell spare parts ?

A6: Yes, Of course .we can sell spare parts to you.