Electrosurgery Unit

Product description

Type:

The output of this machine is fully suspended, with two independent and isolated CF-type defibrillation-proof application parts (unipolar and bipolar), non-AP, APG-type common equipment, 220V±10% mains power supply.

Function:

The 416KHz (±10%) high-frequency current generated by this machine can perform surgical operations such as cutting and coagulation on biological tissues. It has the functions of unipolar pure cutting: pure cutting, mixed cutting 1, mixed cutting 2; , soft setting and standard bipolar six working modes.

Technology parameter

Rated output power:

a) Pure cut: 1W ~ 350W (load 500Ω); precise cutting without Joga, 100% cutting.

b) Mixed cutting 1: 1W ~ 250W (load 500Ω); superficial Joga precise cutting 80% cutting, 20% coagulation.

c) Mixed cutting 2: 1W～200W (load 500Ω); 60% cutting, 40% coagulation.

d) Spray coagulation: 1W ~ 80W (load 500Ω); large area coagulation

e) Soft coagulation: 1W ~ 120W (load 500Ω); precise superficial point coagulation

f) Standard bipolar: 1W ~ 70W (load 100Ω);

normal operation:

a) Ambient temperature range: 5°C to 40°C;

b) Relative humidity range: ≤95%;

c) Atmospheric pressure range: 86.0 ~ 106.0kPa;

d) Power supply: 220V±22V, 50～60Hz±1Hz;

e) Working frequency: 416kHz;

Machine power consumption: ≤1100VA. (cutting function 350W);

Transport and storage:

a) Ambient temperature range: -40℃～55℃;

b) Relative humidity range: ≤95%;

c) Atmospheric pressure range: 500kPa ~ 1060kPa.

Smoke evacuator parameters:

Power supply: 110～220VAC, 50Hz, 2A Maximum vacuum degree: ≥10kPa Input power: 350W

Maximum air volume: 100 l/min Stop delay time: 0-120 adjustable

Noise: ≤50dB (A) Particle removal: 99.99% @0.2um

It has three starting functions of synchronous, pedal and manual, and the delay stop of air volume output is adjustable.

LCD liquid crystal display, providing three air volume output modes: open, surgical knife pen, and endoscopic. 

FAQ

Q1. What is the advantage about your company?

A1.The company has been engaged in export business for more than 15 years, with a professional team and professional production line.

Q2. Do you provide OEM service?

A2. Yes, we can provide OEM service. We are experienced OEM suppliers.

Q3. How do we ensure quality?

A3.There are always pre-production samples before mass production;

Final inspection is always done before shipment;

Q4.Can you send samples?

A4.Yes, we can send samples to you for evaluation.